What could be more romantic for a woman in the cold season than the image of a man in a warm knitted sweater next? Probably only the fact that this sweater is tied for him with his own hands. Such a wonderful gift, like a knitted sweater, will warm and give a feeling of comfort even to the most brutal young man, you just need to choose a model of the future sweater based on the preferences and tastes of a man in order to get to the point!
To get started is to consider several options for knitting men's sweaters. There are a lot of models, as well as ways of knitting sweaters, pullovers, jumpers. Here you need to know what exactly a man will like: braids, aranes, embossed patterns, funny drawings with deer, or minimalism and severity in each line of a knitted thing.
Let us examine in more detail several possible options for knitting sweaters, to make it easier to choose the most suitable. Beginner needlewomen, too, will be able to surprise loved ones with their skills, you just need to follow the diagrams and descriptions exactly.
Men's knitting sweater - schemes with descriptions
If the needlewoman has only recently begun to master the art of knitting, but really wants to please a loved one with a nice and beautiful thing done with her own hands, this is not a reason to take on small “projects”, like knitting hats, scarves or vests. It is quite possible for newbies to knit a sweater with needles, it is only important to choose a simple model for the beginning and carefully follow the instructions. Consider several options for knitting sweaters knitting needles that are suitable for both beginners and seasoned knitters.
The simplest model for novice needlewomen
To begin, let's try to knit a men's sweater with knitting needles with a wide elastic band. We have a casual version for everyday activities.
Size of sweater:
48/50 (52/54) 56/58
For work you will need:
- Yarn (100% sheep wool sectional dyeing; 100 m / 50 g) 650 (700) 750 g;
- Spokes number 5;
- Circular needles No. 5 with a length of 50 cm.
The main pattern fit:
Alternately - 4 facial, 2 purl.
Knitting density:
16 p. X 22 p. = 10 x 10 cm
Working process:
Back
Dial the needles 90 (96) 102 loops and knit as follows: hem, 1 purl, 14 (15) 16 x 6 p. Main pattern, 1 purl, hem.
Through 45 (46) 47 cm = 98 (100) 102 r. from the initial row close on both sides for armholes of 2 (3) 4 p., then in each 2nd p. 1 x 2 p. And 3 (4) 6 x 1 p. 1 p. = 76 (80) 84 p.
At the height of the armhole 21 (22) 23 cm = 46 (48) 50 p. close to the shoulder bevel in every 2nd p. 2 x 6 (7) 8 p.
Simultaneously with the first trim for the shoulder bevel, close the middle 32 pp for the neck, then knit both sides separately.
Along the inner edge, for further rounding, close in each 2nd p. 3 x 1 p., Then close the remaining 7 p.
The other side finish in mirror image.
Before
Dial the needles 90 (96) 102 loops and knit as follows: hem, 1 purl, 14 (15) 16 x 6 p. Main pattern, 1 purl, hem. Next, knit like a back, but with a deeper neck.
To do this, at the height of armored 17 cm = 38 p. close the middle 26 p., then both sides knit separately.
Along the inner edge for rounding up close in every 2nd p. 6 x 1 p.
Start the shoulder bevel at the same height as on the back.
The other side finish in mirror image.
Sleeves
Type on the spokes for each sleeve 42 (48) 54 loops and knit as follows: hem, 2 purl, 6 (7) 8 x 6 points. Main pattern, 2 purl, hem.
For bevels, add on both sides in each 6th p. 5 x 1 p., In each 8th p. 5 x 1 p. = 62 (68) 74 p. Add gaps on both sides to the pattern.
Through 47 (48) 49 cm = 104 (106) 108 r. from the initial row, close the sleeves for the sleeves on both sides 2 (3) 4 p., then in each 2nd p. 1 x 2 p., 4 x 1 p., 1 (2) 3 x 2 p., 2 x 3 p. And 2 x 4 p.
In the next row, close the remaining 14 p.
Assembly
Details moisten, stretch acc. indicated in the pattern size, pin on the pattern and leave to dry completely.
Run shoulder seams.
For circular knitting needles, dial around the edge of the neckline 74 (80) 86 p. And knit the main pattern with 20 (21) 22 cm = 44 (46) 48 p., Close the loops freely.
Run the side seams and the seams of the sleeves, sew the sleeves.
Beautiful model with a pattern for men
The theme of knitted clothing is often associated with northern culture, since many knitting methods came from countries with a predominantly cold climate. Knitting embossed patterns, motifs, arans and braids have always been incredibly popular not only when creating women's clothing, they are often chosen when knitting things for men and children. Therefore, you need to learn how to knit a men's sweater with a pattern and try to create it yourself. Consider the scheme and description of the knitting model of a sweater in a rustic style with embossed large patterns and a high collar.
Size of sweater:
S (M) L (XL)
For work you will need:
- Yarn (85% wool, 15% mohair; 50 g / 60 m) - 27 (28) 30 (31) hanks of white unpainted;
- Spokes number 4,5 and 5;
- Circular needles No. 4, 40 cm long
Width and length of the product:
- On the chest girth - 108 (116) 124 (132) cm;
- 69 (70) 71 (72) cm.
Knitting density:
Approximately 20 p. X 27 p. = 10 x 10 cm, connected by a relief pattern with needles No. 4,5 and 5. To make the knitting density match the given one, the fragments of the structural pattern should be made according to the pattern on needles of different thickness - No. 4.5 and 5.
If the instruction contains only one number, then it applies to all sizes.
Knitting scheme:
Working process:
Back
On the needles number 4.5, dial 108 (116) 124 (132) p. And knit a relief pattern according to the scheme (1st row = izn. Row).
When the length of the part is 44 cm, begin to form the armholes. To do this, fix the mark in the middle of the back and on both sides (at the beginning of each row) close 3, 2, 1, 1, 1 p. = 92 (100) 108 (116) p.
When the height of the armhole from the mark is 23 (24) 25 (26) cm, begin to form a neck: close the average 18 (18) 22 (22) n. And finish both sides separately.
Then at the beginning of the next 2 p. close from the inside edge to round the necklines 3, 2 p.
Simultaneously from the outer edge close for the shoulder bevel at the beginning of each row of 10, 11, 11 (12, 12, 12) 12, 13, 13 (14, 14, 14) loops.
Before
Knit as back, but only with a deeper neck.
When it remains to tie up the last 11 cm of the part (check back - up to the last closed hinge of the shoulder bevel), close the middle 8 (8) 10 (10) section and finish both sides separately.
From the inner edge, close to round the neck at the beginning of each row at 3, 2, 2, 1, 1, 1 (3, 2, 2, 1, 1, 1) 3, 2, 2, 1, 1, 1, 1 ( 3, 2, 2, 1, 1, 1, 1) p.
Having tied up to the first closed hinges of the shoulder bevel (to check on the back), close the loop similarly.
Sleeves
On the needles number 4.5 dial 52 (56) 60 (64) p. And knit relief pattern according to the scheme (1st row = wear.
row).
Important: to distribute the pattern on both sides of the middle indicated by the arrow in the diagram.
When the length of the part is 10 cm, add 1 p. On both sides (after / before the edge loop). These increments are repeated in every 6th p., Including the added loops in the pattern, = on the spokes 84 (88) 92 (96) p.
When the length of the sleeve is about 48 (49) 50 (51) cm, close for okat on both sides (at the beginning of each row): 2 times 2 points, 2 times 3 points, 2 times 4 points and 2 5 p. times. Then close the remaining loops.
Assembly
Stitch parts from the front side with a mattress and knit seam = mattress - longitudinal edges of the parts (= 1 p. X 1 p.), Knitted seam - edges with closed loops.
Run side seams and sleeve seams. Sew the sleeves, starting from the shoulder seam and the middle of the sleeves, sew in both directions downwards, then sew the sleeve in the armhole in the lower section.
Stand collar
For circular needles No. 4.5, dial on the front side of the loop, starting from the right shoulder seam: 1 p. From each closed loop around the edge of the neck of the back + 5 p. Additionally at the beginning and end (distribute the loops evenly); 1 p. from each row down to 2 last closed loops on the left side of the front; 1 p. from each closed loop; on the right side of the front loop, dial as on the left (the total number of loops must be a multiple of 4).
Knit in a circle: 1 p. back, 1 p. facial, 1 p. back and 1 p. facial.
Then continue to knit in a circle with a rubber band (= alternately 2 faces. And 2 sleeps.) Until the height of the collar is 16 cm and close the loop.
Knitting a model with braids
Knitting a men's sweater with knitting needles is a special pleasure, because this thing will give warmth to an important person for you. Moreover, this thing can also be a real decoration for a man. To do this, just fit the more complex in the implementation of embossed patterns in the form of braids, weaves and cones. Consider in detail how to knit a men's sweater with braids - a fashionable classic for all time.
Size of sweater:
48/50 (52/54) 56/58
For work you will need:
- Yarn (100% sheep wool; approx. 170 m / 100 g) approx. 800 (800) 900 g sulfur;
- Spokes number 4,5 and 5;
- Circular needles No. 4, 40 cm long
Patterns and schemes
Elastic: alternately 3 facial, 2 purl.
Cross gum: alternately 2 facial, 2 purl.
Facial surface:front rows - front loops, purl rows - back loops.
Patent pattern (A)
Knit on 7 loops according to the scheme (= segment A).
1-4th p. repeat 1 time, then the 3rd and 4th p. constantly repeat.
Pattern "Cones" (B)
Knit on 11 loops according to the scheme (= segment B). AT
1-6th p. constantly repeat.
Pattern "Spit" (C)
Knit on 24 loops according to the scheme (= segment C).
1-26th p. tie 1 time, then 3-26th p. constantly repeat.
Alternating patterns
Knit and distribute the loops according to the instructions.
Knitting scheme and description
Knitting density:
18 p. X 28 p. = approx. 10 x 10 cm, connected by the front surface;
25 p. X 28 p. = approx. 10 x 10 cm, connected by alternating pattern (density on average).
Working process:
Back
On the spokes №4,5 dial 115 (125) 135 loops. For a belt knit with a rubber band 17 r. (= 6 cm), with the 1st p. - purl, start with 3 facial. In the last r. add, evenly distributing, 13 p. = 128 (138) 148 p.
Then move to the spokes No. 5, distribute the loops as follows: edge, 0 (3) 6 n. Front satin stitch, 7 n. Patent pattern A, 3 (5) 7 n. Facial satin finish, 7 n. Patent pattern A, 9 p. cross gum, 74 p. Alternation of patterns between arrows a and b, 9 p. cross gum, 7 p. Patent pattern A, 3 (5) 7 p., face trim, 7 p. Patent pattern A, 0 (3) 6 the front surface, edging.
Through 33.5 (32) 30.5 cm = 94 (90) 86 p. from the gum to close on both sides for armhole 3 (4) 4 p., then in each 2nd p. close 1 x 2 (3) 3 p., 3 (4) 5 x 2 p. and 2 (3) 4 x 1 p. = 102 (102) 106 p.
After 20 (21.5) 23 cm = 56 (60) 64 p. from the armhole close on each side for bevel shoulder 8 (8) 9 p., then in each 2nd p. close another 3 x 8 p.
Simultaneously with the 1 nd flank for the humeral bevel, close the middle 18 (18) 20 s for the neck and finish the left side first.
Along the inner edge, for further rounding, close in each 2nd p. another 2 x 5 p.
The other side finish in mirror image.
Before
Knit like a back, but for a deeper neck already through 15.5 (17) 18.5 cm = 44 (48) 52 p. armhole heights close middle 16 (16) 18 s. and first finish the left side.
Along the inner edge, for further rounding, close in each 2nd p. another 2 x 3 p., 1 x 2 p. and 3 x 1 p.
Shoulder bevels perform as on the back.
The other side finish in mirror image.
Sleeves
On the needles №4,5 dial for each sleeve 60 loops.
For cuff knit elastic band 17 p. (= 6 cm), with the 1st p. - purl, start with 3 facial. In the last r. add, evenly distributing, 8 p. = 68 p.
Go to the needles number 5. Distribute the loops as follows: edge, 5 points. Patent pattern A from the arrow c, 9 points transverse elastic band, 7 points. Patent pattern A, 24 points. “Spit” pattern C, 7 points. Patent pattern A, 9 points cross. rubber band, 5 p. patent pattern A to arrow d, edging.
For bevels through 3.5 cm = 10 p. From the cuff, add 1 p. on both sides, then in each 10th p. add 2 x 1 p. and in each 10 (8) 6th p. 7 (9) 11 х 1 p. = 88 (92) 96 p. Added loops after reaching the full patent pattern A (= 7 p.) Knit with a face satin.
Through 45 (43.5) 42 cm = 126 (122) 118 p. from the cuff, close the sleeves on both sides for 3 (4) 4 p., then in each 2nd p. close 1 x 3 p., 4 (3) 3 x 2 p., 10 (12) 14 x 1 p., 2 x 2 p. and 2 x 3 p.
Through 13.5 (15) 16.5 cm = 38 (42) 46 p. heights of the sleeves close the remaining 20 (22) 26 p.
Assembly
Run shoulder and side seams.
For the collar, dial the circular needles No. 4.5 loops along the edge of the neck of the back 38 (38) 40 p. And on the edge of the neck of the front 42 (42) 45 p. = 80 (80) 85 p. Knit alternately 2 facial, 3 back. Through 23 cm = 62 p. loop close on drawing. Unscrew the collar on the front side.
Run the seams of the sleeves, sew the sleeves.
